The RAD 50 tool

Torque range of 1,500 to 5000 Ft lbs. These nuts are 3" a/f and are torqued to 4,500 Ft lbs. This tool has a 1-1/2" Square Drive and has an RPM of 7. This application is a coal fired steam boiler press.

Correct torque is crutcial, to ensure even load across the flange. The torque output is set using the supplied torque chart. This chart has PSI and torque readings. Simply set the torque required by adjusting the regulator before operation.

BALL MILL LINER BOLTS TORQUE TOOLS
The RAD tools are the solution for this job. Liner bolts need the correct torque. Using rattle guns simply over, or under-tigtens bolts. The result is bolts failing.
RAD are High RPM torque tools. They offer torque accuracy to within 2% repeatability. By applying correct torque bolts stay tight. By not over-torquing, the bolts retain their integrity. Most Mills have hundreds of bolts. Re- liner shutdowns hold up production. Rad is the answer. 88 times less vibration 55% less db. fasteners reliable again. Less down time, Safe. Get the job done right the first time.

RAD 700-2 Battery RAD torque tool This tool offers cordless operation using a 18 Volt battery. Exclusive to RAD the battery torque tools are proving a very popular option. Perfect for speeding up torque jobs in and out side the workshop.

300 - 700 Ft Lbs

3/4" Square Drive

RAD 1000 Pneumatic Single speed Torque tool

200 - 1000 Ft Lbs, 3.6 kg, 20 RPM

*** RAD TOOLS AS USED BY OTRACO ***
See Video of Otraco checking Wheel nut torques on a Caterpillar 793c DUMP TRUCK - Rear Wheels

The tool in the Video is a RAD-2000 ( 500 - 2000 ) 1" square Drive. The RAD 2500 also suits this application equally well.

*** RAD TOOLS AS USED BY OTRACO ***
See Video of Otraco checking Wheel nut torques on a Caterpillar 793c DUMP TRUCK - Front Wheels

The tool in the Video is a RAD-25 ( 650 - 2500 ) 1" square Drive. The RAD 2000 also suits this application equally well.

Rad 2000 - D11 Truck Bolts


RAD-2000 ( 500 - 2000 ) 1" square Drive